ASP 6 Help PDF files bugs
Posted: Sat Jul 25, 2009 6:44 pm
AS6-Pro-QuickStart.pdf:
page 18:
Top left image shows wrong menu (should be line effect, not shape), and bottom left picture "The rendered cloud" should show the cloud with 'Soft Edge' line effect. This also applies to the right image on page 24.
Anime Studio Pro 6 Users Manual.pdf:
pages 30-31 and also page 174:
There are no parameters "Min width" and "Max width" in Freehand Options, there is "Width variation %".
page 36:
Left image shows wrong result - the wall stays in place after selecting the "Hide all" option.
page 44:
It's not that easy to create such a square with the new ASP6 default project settings (NTSC D1 Widescreen).
page 97:
Layer settings screenshot shown in old program skin.
page 281:
Timeline screenshot shown in old program skin.
page 306:
Anime Studio on the Web: URL doubled in that paragraph.
_____________________________________________________
I also noticed some changes that should be documented, but they are not. For example:
When you want to weld points or create a shape on a frame other than zero, the spacebar needs to be held down for a longer time.
When mask is enabled, the lowest layer in the group automatically considered a mask.
More to discover...
page 18:
Top left image shows wrong menu (should be line effect, not shape), and bottom left picture "The rendered cloud" should show the cloud with 'Soft Edge' line effect. This also applies to the right image on page 24.
Anime Studio Pro 6 Users Manual.pdf:
pages 30-31 and also page 174:
There are no parameters "Min width" and "Max width" in Freehand Options, there is "Width variation %".
page 36:
Left image shows wrong result - the wall stays in place after selecting the "Hide all" option.
page 44:
It's not that easy to create such a square with the new ASP6 default project settings (NTSC D1 Widescreen).
page 97:
Layer settings screenshot shown in old program skin.
page 281:
Timeline screenshot shown in old program skin.
page 306:
Anime Studio on the Web: URL doubled in that paragraph.
_____________________________________________________
I also noticed some changes that should be documented, but they are not. For example:
When you want to weld points or create a shape on a frame other than zero, the spacebar needs to be held down for a longer time.
When mask is enabled, the lowest layer in the group automatically considered a mask.
More to discover...